Classic EAM Rafts
Models EAM-2B, EAM-5, EAM-8, and EAM-12 life rafts are intended for use by
crewmembers and passengers aboard aircraft/boats during emergencies. These
rafts are comprised of a circular flotation tube and a fabric deck which is
attached to the tubes. The EAM-8 and 12 life rafts have the flotation tube
compartmentalized into two chambers by vertical bulkheads. Neoprene coated
nylon fabric is used throughout each raft design.
A manually operated carbon dioxide (CO2) inflation system, a life line and
miscellaneous accessories to assist in boarding, use and maintenance are contained
about the raft perimeter. Appropriate instructions for the use of these accessories
are printed on the tube and deck. A raft instruction manual is tied to the
deck.
Each raft with a standard or standard plus kit has a canopy which is stowed
with the survival kit that is contained in a bag attached by a line to the
raft tube. The canopy contains a door opening with a roll up door cover and
a rainwater collector in the top or roof panel. Canopy rods and a center mast
are provided to support the canopy when it is erected. The sides can be raised
or lowered as required.
The rafts, accessories canopy and survival kit are contained in a red or yellow
carrying case. The carrying case is marked with model number, raft capacity,
operating instructions, manual inflation handle location, weight and serial
number and is secured to the raft via the raft retaining line.
TOTAL TUBE TOTAL
MODEL CAPACITY OVERLOAD BUOYANCY DECK AREA
EAM-2B 2 3 320 lbs. 8 sq. ft.
EAM-5 4 5 881 lbs. 14.7 sq. ft.
EAM-8 6 8 1368 lbs. 21.6 sq. ft.
EAM-12 12 14 2414 lbs. 43.63 sq. ft.
  | |
|
|
|