Artex
Survival ELTs function in a life raft environment. They can either be placed
in a survival kit or in the pocket of a life raft. Both of the above units are
equipped with a magnetic reed switch, water sensor, and one of two antennas.
The magnetic reed switch acts as a safety device so the unit cannot be falsly
activated. This magnetic switch must be pulled out for the unit to activate.
Once the reed switch has been pulled the water sensor may now by utilized. If
this sensor comes into contact with any sort of moisture it will automatically
activate the ELT.
ELT 201-S/203-S/203-SL:
Pictured on the left is the ELT 201S. There are two differences between the
ELT 200S and the 201S. The 201S can either use a detachable wire whip antenna
or a detachable conformal antenna. Secondly, the water sensor is also detachable.
A customer may choose not to utilize the water sensor they may do so. There
is also an optional flotation collar that is shipped with this model.
P/N 455-7067.
ELT 201-S/203-S/203-SL:
Key Benefits
TSO C91a approved
Small 2.50" x 2.73" x 6.34"
Light 2 lbx.
Antenna: Detachable -wire whip or conformal
Water Sensor: Optional -various lengths
Reed Switch Safety System: Protects agains accidental activation.
Optional Flotation Collar-Tether included
ELT 200-S:
Key Benefits
TSO C91a approved
Small 2.50"x2.73"x6.34"
Light 2lbs.
Antenna: Integral - Conformal
Water Sensor: Integral -22" long
Reed Switch Safety Sytem: Protects against accidental activation
